#Bunker hill security camera drivers password#
#Bunker hill security camera drivers series#

#Bunker hill security camera drivers password#

There could be multiple computers and devices on that network so you need to tell the router which one to specifically connect to by assigning a sort of map to all of the ports you have configured. If you were to just type your external IP address into the browser, your router is not going to know which device you are trying to reach. This is going to be necessary in order to connect to your DVR from a remote location. The next thing youвЂ™re going to want to do is port forward your router. You may always move the DVR after the initial setup so the cable that came with your DVR should be fine. For the initial setup, you will not need the long cat5 cable if you are planning on relocating the DVR to a location thatвЂ™s far away from the router. You will also be using a cat5 cable for this connection. Most routers come with at least 4 ports for hardware that will be connecting to the internet.

Connect your DVR to one of the data ports of your router.

This port is usually away from the other ports on the back of the router which are for the devices which will be connecting to the internet. Usually your router will have one port for the internet connection.

Connect your modem to the internet port on your router.

Getting the model setup and connected is beyond the scope of this article and this step needs to be completed before moving forward. All modems are different so many sure you get the information for yours from your service provider or its manual.

#Bunker hill security camera drivers series#

Usually modems will have a series of lights on the front which are status lights to let you know that itвЂ™s currently working.

Make sure that your Modem is connected to the internet.

Usually the internet service provider will provide you with the option to rent a modem from them unless you have your own available for setup.

However, itвЂ™s still possible to view your system remotely with a slower connection such as DSL. The faster the speeds they are able to provide you with, the better. This can come from any internet service provider in your area. There are a few basic things you will need in order to get started. However, please note that some cameras do not have these features, but for the ones that do, being able to access them remotely is a great feature to have.

If youвЂ™re not able to reach the location where the DVR and cameras are installed, this will allow you to change the settings from wherever you are so that you donвЂ™t miss out on anything in the meantime. Some people have had issues where their cameras looked great the whole first week that they had them set up but then all of a sudden a big storm comes in and they canвЂ™t see anything anymore and one of the cameraвЂ™s may have a setting which can compensate for this condition change.

Being able to change settings on cameras that are all of a sudden not able to see due to conditions changing.

This is handy if you notice that the DVR needs to have some of its configurations modified.

Being able to configure the DVR and specialized cameras remotely.

Being able to review and back up footage from your DVR remotely so that you have a copy of what is happening even if the DVR ends up getting damaged or stolen.

This will give you the ability to prevent crimes as well as keep an eye on what is currently happening in the locations that the cameras are watching over.

Being able to watch your security cameras while you are away from the location is one of the most important features of current DVRs.

First, here are some of the benefits of connecting your DVR to your network.